- Ideal for wood floors, cabinets, furniture, paneling, bartops, doors, trim
- 100% pure polyurethane offers ultimate protection
- Coverage Approx: 500-600 sq feet per gallon on raw wood
- High solids / low odor
- Quarts: 450 VOC/L; Gallons: 350 VOC/L
Last N Last Clear Polyurethane Wood Finish adds the beauty and durability of 100% pure polyurethane to any wood surface. This clear, tough coating can be used on interior floors, furniture, doors and moldings and will resist abrasion, foot traffic, alcohol stains, water spotting, acid alkali and more. Formulated with high-quality resins, Last•n•Last Clear Polyurethane Wood Finish retains color beautifully, with excellent adhesion that resists flaking and chipping.
Apply in a well ventilated area by brush, roller, spray or applicator at room temperature and not in direct sunlight. Apply with the grain in long even strokes. When using a roller, work slowly to avoid air bubbles. Allow minimum of four to six hours between coats, or until thoroughly dry. Heavy finish application, high humidity or lack of airlfow will extend drying times. If waiting longer than 24 hours between coats, sanding is recommended. Wipe to remove dust after sanding.
Clean-up: Use paint thinner, mineral spirits or turpentine to clean brushes and applicators.