Liberon Black Bison Liquid Wax is ideal for nourishing and protecting all types of wood. It is particularly suitable for large surfaces such as panelling, floors, doors, staircases and other large interior woodwork.
Black Bison Liquid Wax is well known for its quality and pleasant, distinctive aroma which means it has traditionally been used on antiques. It will also enhance the natural beauty of new wood whilst protecting it against dryness.
- Feeds, polishes and helps to prevent wood drying out
- Highly lustrous and hardwearing
- Gives good resistance to finger marks
- Helps cover marks and scratches
- EN71 Part 3 Approved – Safe for toys
- Endorsed by the Guild of Master Craftsmen
- Usage : Interior
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust.
Shake well before use. Apply Black Bison Liquid Wax sparingly with a cloth, brush or spray gun. Allow to become touch dry for a minimum of 30 minutes, then buff with a clean cotton cloth, or for a faster finish with a Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better quality finish apply thin coats of wax and build-up to the desired level of sheen, buffing between coats.
Always test product in a spare or inconspicuous surface to check colour, compatibility and end result.
Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.
1 L = 10-12 m²
Clear, Neutral, Medium Oak, Dark Oak, Georgian Mahogany, Antique Pine
500 ml, 5 L
Min 30 minutes